Forum Discussion

Experienced Cover User

2 years ago

TPAR report failed to lodge

Our 2023 TPAR has failed to lodge. I have opened the report in Notepad to try identify the error. I have removed all visible non ASCII characters (in particular forward slash i.e Unit 1 / 789 S...

AccountRight Live

gavin12345
2 years ago
Hi ACorp

I advise against editing a TPAR.C01 file using notepad. Every 'line' has to be a specific length and each field in a specific place, one character off and the report will fail lodgement or have lots of errors.

To help locate the offending character, deduct 5 from the line number and this will give you the number of the Payee affected. View that payee in MYOB, plus one either side to see if you can find the issue.

A forward space might not be the cause. More likely to be a 'new line' in a MYOB address field. MYOB allows you to have multiple lines for address fields, the ATO does not. Make any fixes in your MYOB file and generate a new TPAR file.

Regards
Gavin

gavin12345

Ultimate User

2 years ago

Hi ACorp

I advise against editing a TPAR.C01 file using notepad. Every 'line' has to be a specific length and each field in a specific place, one character off and the report will fail lodgement or have lots of errors.

To help locate the offending character, deduct 5 from the line number and this will give you the number of the Payee affected. View that payee in MYOB, plus one either side to see if you can find the issue.

A forward space might not be the cause. More likely to be a 'new line' in a MYOB address field. MYOB allows you to have multiple lines for address fields, the ATO does not. Make any fixes in your MYOB file and generate a new TPAR file.

Regards

Gavin

ACorp
Experienced Cover User
2 years ago
Hi Gavin,

Thank you for your suggestion (count back 5 from line listed as error). It worked and I could idently the relevant supplier card.

For some reason, when the supplier card was imported into MYOB from our construction software, a tab space was inserted in the middle of the first line of the address, thereby creating a 'gap' in the address.
This was strange because the extra spacing is not on the supplier card in our construction software.

But, none the less, the extra spacing was removed from the card in MYOB and the new TPAR lodged succesfully.

Thanks again!

Regards,
Heather
- Isaiah_C
  MYOB Moderator
  2 years ago
  Hi ACorp,
  
  Thank you for your patience and I'm sorry for the delayed response. Thank you for the information and for doing the steps that was provided by gavin12345. It's great to hear that it's now resolved. If you have any concerns in the future, please feel free to post in our Community Forum.
  
  Please let me know if you need further help.
  
  Kind regards,
  
  Sai
ACorp
Experienced Cover User
2 years ago
Hi Gavin,

Thank you for you reply.

I should have explained myself better. I had opened the TPAR report in Notepad and did a search for non ASCII characters and then removed them in MYOB and ran a new TPAR report and lodged it – which still failed.

I will try your method and deduct 5 from the line number to try locate the cause.

Regards,
Heather